The instrument panel illuminates as soon as
the vehicle is unlocked and trip computer set-
tings can be made. If none of the trip com-
puter's controls are used within 30 seconds
after the driver's door has been opened, the
instrument panel lighting will go out and the
trip computer cannot be used again until:
•
the ignition is put in mode II
•
the engine is started
NOTE
If a warning message appears while you
are using the trip computer, this message
must be acknowledged in order to return
to the trip computer function. Acknowl-
edge a message by pressing OK.
Related information
•
Trip computer – functions, analog instru-
ment panel (p. 110)
•
Trip computer – functions, digital instru-
ment panel (p. 113)
•
Trip computer – Supplementary informa-
tion (p. 115)
•
Trip computer – Trip statistics (p. 116)
See Ignition modes (p. 73) for information about the various ignition modes.
24
24
03 Instruments and controls
03
109