Using Mykey With Remote Start Systems; Mykey Troubleshooting - Ford 2015 FUSION Owner's Manual

USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with non

MYKEY TROUBLESHOOTING

Condition
I cannot create a MyKey.
I cannot program the configurable
settings.
I cannot clear the MyKeys.
I lost the only admin key.
I lost a key.
MyKey distances do not accumulate.
No MyKey functions with the keyless
entry transmitter.
Fusion/Mondeo (CC7), enUSA
MyKey
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
Potential Causes
· The key or transmitter used to start the
vehicle does not have admin privileges.
· The key or transmitter used to start the
vehicle is the only admin key (there always has
to be at least one admin key).
· Vehicles with keyless start: The keyless start
transmitter is not placed in the backup slot,
located in the center console. See Keyless
Entry (page 61).
· SecuriLock passive anti-theft system is
disabled or in unlimited mode.
· The key or transmitter used to start your
vehicle does not have admin privileges.
· No MyKeys are created. See Creating a
MyKey (page 53).
· The key or transmitter used to start your
vehicle does not have admin privileges.
· No MyKeys are created. See Creating a
MyKey (page 53).
Purchase a new key from an authorized dealer.
Program a spare key. See Passive Anti-Theft
System (page 65).
· The MyKey user is not using the MyKey.
· An admin key holder cleared the MyKeys and
created new MyKeys.
· The key system has been reset.
· An admin transmitter is present at vehicle
start.
· No MyKeys are created. See Creating a
MyKey (page 53).
56
I n f o r ma t i o n P r o v i d e d b y :