Asus SP-AC2015 Wi-Fi Connect User Manual page 39

Dual band 3x3 802.11ac gigabit router
Table of Contents

Advertisement

If the ADSL "LINK" light blinks continuously or stays off,
Internet access is not possible - the Router is unable to
establish a connection with the ADSL network.
Ensure that all your cables are all properly connected .
Disconnect the power cord from the ADSL or cable modem,
wait a few minutes, then reconnect the cord.
If the ADSL light continues to blink or stays OFF, contact your
ADSL service provider.
Network name or encryption keys are forgotten.
Try setting up the wired connection and configuring the
wireless encryption again.
Press the Reset button at the rear panel of the Wi-Fi Connect
for more than five seconds.
How to restore the system to its default settings?
Press the Reset button at the rear panel of the Wi-Fi Connect
for more than five seconds.
Refer to the section Restoring/Saving/Uploading settings
in Chapter 3 of this user manual.
The following are the factory default settings:
User Name:
Password: admin
Enable DHCP:
IP address:
Domain Name:
Subnet Mask:
DNS Server 1:
DNS Server 2:
SSID (2.4GHz):
SSID (5GHz):
admin
Yes (if WAN cable is plugged in)
192.168.27.1
(Blank)
255.255.255.0
192.168.27.1
(Blank)
ASUS
ASUS_5G
39

Advertisement

Table of Contents
loading

Table of Contents