Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-XA34 Operating Instructions Manual

Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
• If both
• When no signal is input to the connected video equipment, the TV screen
• Do not connect video equipment to the t 3 (video input) jacks at the
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
L(MONO) ENTER SELECT
3 MENU AUTO PROGR PROGR
Tips
• If you want to stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
jack) and the black plug to
output from the VCR to the program number 0 on the TV.
(S video input) and t 1 (video input) at the rear of your TV
are input at the same time, the
selected. To view the video input to t 1 (video input), disconnect the
S video cable.
becomes blue.
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
1
2
channel, then preset your TV manually (see page 28).
-L (MONO) (the white jack).
(S video input) is automatically
(the yellow
Using Your New TV
5