Table of Contents
Advertisement
10. Do you see the following information on the display screen?
DIAGNOSTIC OPERATING INSTRUCTIONS
DIAG-l
This diskette contains diagnostics and utilities for your system. You
should use these procedures whenever you are having problems with your system
which have not been corrected by any software application procedures available.
In general, the procedures will run automatically. However, sometimes you will
be required to select options, tell the system when to continue. and do simple
tasks and exchange diskettes.
Yes.
No.
Go to the next step.
Go to IBM RT PC Problem Determination Guide.
11. Read the DIAGNOSTIC OPERATING INSTRUCTIONS.
Some of the key functions are listed below, in case you need
them.
•
Enter continues the procedure or performs an action.
•
End stops a test or an action.
•
FlO returns to the previous menu and cancels any changes.
•
Escape resets the procedures and returns to the Diagnostic
Operating Instructions.
•
Page Down lets you see information below that shown on
the SCreen.
•
Page Up lets you see information above that shown on the
screen.
•
Backspace lets you correct errors.
12. Press Enter.
CONTINUE TO THE NEXT PAGE
Section 3. Testing the System
3-9
Advertisement
Table of Contents
