Hardware Options Installation; Introduction; Hp Product Quickspecs; Drive Installation Guidelines - HP ProLiant ML10 User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

HP product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).

Drive installation guidelines

When adding drives to the server, see the documentation provided with the second drive enablement kit.

Installing the drive enablement option

Press the Power On/Standby button.
1.
The server powers down and enters standby mode. The system power LED changes from green to
amber. Power is still applied to the server.
Disconnect the power cord from the power source.
2.
Disconnect the power cord from the server.
3.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
Hardware options installation 20