Dukane 8934 User Manual page 20

2. Web Control
2.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
Item
Schedule
Date (Month/Day)
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item
Time
Command
[Parameter]
Power
Input Source
Click the [Register] button to add new commands to the schedule list.
Click the [Delete] button to delete commands from the schedule list.
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
NOTE
• After the projector is moved, check the date and time set for the
projector before configuring the schedules.
• The internal clock's time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
• Event "Input Source" will not be executed if security feature is enabled and
the projector is locked due to the feature.
• Certain error state in the projector (such as temperature error, lamp error) will
prevent the projector from appropriate execution of scheduled functions/events.
• Please refer to &Troubleshooting in the Operating Guide in case
scheduled functions/events are not executed appropriately as you've set.
20
Click the [Enable] check box to enable the schedule.
Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Configures the time to execute commands.
Configures the commands to be executed.
Configures the parameters for power control.
Configures the parameters for input switching.
Description
Description