Lincoln Electric RANGER 3PHASE SVM207-A Service Manual page 27

C-3
RECOMMENDED EQUIPMENT
STICK
K704 Accessory Kit which includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
WIRE FEED
LN-25
K449 LN-25 - Includes internal contactor for across the
arc operation (no control cable). Provides "cold" elec-
trode until gun trigger is pressed. Includes gas sole-
noid. Requires Drive Roll Kit and Weld Power Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
LN-15
K449 LN-15 - Includes internal contactor for across the
arc operation (no control cable). Provides "cold" elec-
trode until gun trigger is pressed. Includes gas sole-
noid. Requires Drive Roll Kit and Weld Power Cable.
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Magnum Innershield
Gun and wire bushing is required for gasless welding.
ACCESSORIES
TIG
PRO TORCH ® TIG Torch
• K1783-9 PTA 26V TIG Torch
Magnum Parts Kit and Argon Gas
• KP509 Parts Kit
K930-2 TIG Module (Requires)
• Requires K938-1 Contactor Kit,
• K936-4 Control Cable, and
• K814 Arc Start Switch
Optional TIG Module Accessory:
• K939-1 Docking Kit
• K937-45 Control Cable Extensions (45ft.)
RANGER® 3 PHASE
C-3