Table of Contents
Advertisement
Manual recording
note: Manual Recording overrides all other
functions, including Scheduled Recording.
To record all Cameras, touch
To record an individual Camera, touch
1. Touch
to start recording.
reC
and
1 - 13 0 8 3 6 . A V I
2. Touch
again to stop recording.
Video Motion Detection
note: Video Motion Detection overrides
Scheduled and Manual Recording.
To record all Cameras, touch
To record the Camera that has been activated, set Viewing Mode to Camera Sequence.
1. Touch
to activate motion detection.
MOtiOn will display.
2. When motion has been detected, recording will
begin.
reC
1 - 13 0 8 3 6 . A V I
and
Using Screen Saver
1. Uploading images:
note: Mac is not supported for this function.
a. Connect the USB cable to the computer
where the images are stored.
b. On the back of the Receiver,
X
press and hold
same time, connect the Mini-B end of
the USB cable to the Receiver.
c. "USB pC MaSS StOrage MODe" will
display on the Receiver's screen.
d. An autorun window will appear on
the computer, open the folder to view
files, then run pHOtOrUn.eXe.
Page 14
to set Viewing Mode to 4 Camera.
until desired Camera is displayed.
will display.
to set Viewing Mode to 4 Camera.
will display.
and, at the
For technical questions, please call 1-888-866-5797.
3. new will display and
note: Manual Recording will not work if
Manual Motion Detection is activated.
note: Recording will occur for the duration
specified in Recording Set up.
3. Touch
again to deactivate motion detection.
2. Select a folder to upload images from the
computer to the SD card in the Receiver.
3. Browse the computer for images.
note: All images can be viewed on Receiver,
but only images from the FaMiLy folder
will appear on the Screen Saver.
4. When finished, disconnect the USB cable.
5. Touch
to activate the Screen Saver.
6. Touch
again to return to Viewing Mode.
note: Screen Saver will not activate
when in 4 Camera Viewing Mode.
will flash.
Item 62368
Hide quick links:
Advertisement
Table of Contents
