GMC 2012 Terrain Owner's Manual page 139

Turn-by-Turn
This display is used for the OnStar
or Navigation System Turn-by-Turn
guidance. See OnStar Overview on
page 14 1 or the Navigation manual,
if the vehicle has navigation, for
more information.
Blank Display
This display shows no information.
Vehicle Information Menu
Items
Press the MENU button until Vehicle
Information Menu is displayed. Then
press to scroll through the
following menu items:
Unit
Tire Pressure
Remaining Oil Life
Blank Display
Unit
Press SET/CLR to enter the unit
menu. Then press or
between METRIC or US when the
Unit display is active. Press SET/
CLR to confirm the setting. This will
change the displays on the cluster
and DIC to either metric or English
(US) measurements.
Tire Pressure
The display will show a vehicle with
the approximate pressures of all
four tires. Tire pressure is displayed
in either kilopascal (kPa) or in
pounds per square inch (psi).
See Tire Pressure Monitor System
on page 10 52 and Tire Pressure
Monitor Operation on page 10 54 for
more information.
I n f o r ma t i o n P r o v i d e d b y :
Instruments and Controls
Remaining Oil Life
This display shows an estimate of
the oil's remaining useful life.
to switch
If REMAINING OIL LIFE 99% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the CHANGE ENGINE OIL SOON
message will appear on the display.
See Engine Oil Messages on
page 5 28. The oil should be
changed as soon as possible. See
Engine Oil on page 10 10. In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in the
Maintenance Schedule in this
manual. See Maintenance Schedule
on page 11 3 for more information.
Remember, the Oil Life display must
be reset after each oil change. It will
not reset itself. Also, be careful not
to reset the Oil Life display
accidentally at any time other than
when the oil has just been changed.
5-25