Finishing; Door Closing And Opening - Napoleon GDS28N Installation And Operating Instructions Manual

5.0 FINISHING

DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
5.1

DOOR CLOSING AND OPENING

THE DOOR LATCHES ARE PART OF A SAFETY SYSTEM AND MUST BE PROPERLY ENGAGED. DO
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
When installing the fi re viewing door, a simple procedure must be followed in order to not damage the door.
Open both side doors, exposing the bushings on the left and the latches on the right.
A.
Align the pins on the door to the bushings. Lower into place until both bushings touch.
B.
Engage the latch hooks into the door frame. Snap the rear handle hook to lock the latch closed.
C.
NOTE: It may be necessary to lift the door when securing it to ensure that it is in a horizontal position.
To open the door, repeat in reverse order.
HINGE PIN
BUSHING
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
CATCH SLOT
WARNING
!
RISK OF FIRE!
WARNING
!
DOOR
LATCH
29
72.4
75.3
W415-0153 / E / 05.28.12