Component Identification - Kärcher HD 2.0/10 Ed Operator's Manual

Hide thumbs Also See for HD 2.0/10 Ed:
Table of Contents

Advertisement

Water Supply
(not included)
quick
Coupler
garden Hose
(not included)
gfCI
Pump — Develops high pressure.
Spray gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Injector — Allows you to siphon and mix
detergents when used with a soap nozzle.
Wand — Must be connected to the spray gun.
Unloader — Safety device that relieves pressure when
spray gun trigger is closed.

COMPONENT IDENTIfICATION

Pump
Protector
Pressure
Nozzle
On/Off
Switch
#9.800-085.0 • Rev. 01/08
Detergent
Injector
Unloader
Pump
Spray gun
and Wand
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray
gun.
Pump Protector — Cycles fresh cool water through
pump when recirculating water reaches 140°F.
gfCI — Ground fault circuit interrupter trips when
voltage leaks to ground.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm wa-
ter will discharge from pump protector onto floor.
This system prevents internal pump damage.
Soap
Nozzle
Wand
Hanger
Detergent
Safety
bucket (not
Latch
included)
High Pressure
Hose
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd 1.9/15 edHd 3.5/20 eaHd 2.8/10 ed

Table of Contents