Important Safety Information; Precautions To Avoid Possible Exposure; To Excessive Microwave Energy - Danby DMW758BL Owners Manual And Use Manual

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING
FOR YOUR SAFETY
PRECAUTIONS
TO AVOID
POSSIBLE
EXPOSURE
TO EXCESSIVE
MICROWAVE
ENERGY
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT
(U.S.A. ONLY)
This equipment generates and uses ISM frequencies and if not installed and used properly, that is in
strict accordance with the manufacturer's instructions, may cause interference to radio and television
reception. It has been type-tested and found to comply with limits for ISM Equipment pursuant to Part 18
of FCC Rules, which are designed to provide reasonable protection against such interference in a
residential installation.
However, there is no guarantee that interference will not occur in particular installations. If this
equipment does cause interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following:
• Reorient the receiving antenna of radio or television.
• Relocate the microwave oven with respect to the receiver.
• Move the microwave oven away from the receiver.
• Plug the microwave into a different outlet so that microwave and receiver are on different
branch circuits.
The Manufacturer is not responsible for any radio or TV interference caused by UNAUTHORIZED
MODIFICATION to this microwave oven. It is the responsibility of the user to correct such interference.
For your safety the information in this manual must be followed to
minimize the risk of fire or explosion or to prevent property damage,
personal injury or loss of life.
Do Not Attempt to operate this oven with the door open since
open-door operation can result in harmful exposure to microwave
energy. It is important not to defeat or tamper with the safety
interlocks.
Do Not Place any object between the oven front face and the door or
allow soil or cleaner residue to accumulate on sealing surfaces.
Do Not Operate the oven if it is damaged. It is particularly important
that the oven door close properly and that there is no damage to the:
1 door (bent),
2 hinges and latches (broken or loosened),
3 door seals and sealing surfaces.
The Oven Should Not be adjusted or repaired by anyone except
properly qualified service personnel.
SAVE THESE INSTRUCTIONS
3