Start Cooking - Danby DMW758BL Owners Manual And Use Manual

Start Cooking

You can pause or cancel a cooking operation at any time by touching "STOP/Clear" or opening
the microwave door.
To Pause: Touch "STOP/Clear" until a single beep is heard, or microwave countdown stops.
To Cancel: Touch "STOP/Clear" twice (two beeps should be heard), or until the clock returns
to the display ("0:00" if the clock is not set).
Quick
Cooking
1. Touch "START/+30Sec."
pad for 30 seconds of
cooking. Microwave
instantly begins cooking.
One and Two-
Stage Cooking
If more cooking time is needed...
At any time and for any operation, even while the oven is cooking, touching the
"START/+30Sec." pad adds 30 more seconds of cooking time each time the pad is pressed.
Note: The added cooking time will use the same power level that is currently being used by
the microwave. For example, if the Power Level is currently set to 50% ("PL5" on the
display), then the added cooking time will use a Power Level of 50%.
Operating Instructions
I M P O RTA N T
If the cooking time is an interval of 30 seconds (e.g. 1 min., or 1
min. and 30 sec., 2 min., etc.) you can instantly start to cook
using this method. See also "If more cooking time is
needed..." below. If the recipe requires a lowered cooking power
level, or the recommended cooking time is not an interval of 30
seconds, see One and Two-Stage Cooking below.
This method is ideal for recipes that require a reduced cooking
power level, or meals with special cooking times (i.e., not in
intervals of 30 seconds as in "Quick Cooking".).
1 Touch the "POWER" pad. PL10 appears on the
display.
2 Each additional touch of the "POWER" pad will reduce
the power by 10%. For more information on power levels,
see section 'Power Levels'. To use default power simply
move on to step 3.
3 Enter the cooking time by touching the corresponding
numbers on the number pad (e.g. touch "1", "1" and
"5" for 1 minute and 15 seconds ("1:15" on the display)).
4 For Two-Stage Cooking, repeat steps 1 to 3 and then
continue to step 5.
5 Touch the "START/+30Sec." pad. Cooking time will begin
to countdown until it reaches zero (":00" on the
display). The oven will then resume showing the time (if
set) and sound five beeps.
14