Program The Remote To Control Your Source - Bose CineMate 520 Owner's Manual

Program the remote to control your source

If your source does not support CEC, you can program the remote to control
your source.
1.
Power on your source.
2. Locate the code for your source's brand in the Universal Remote Device Codes
book (provided).
3. On the remote control, press and hold the appropriate source button until all
six source buttons glow, then release.
For example, to program your TV, press and hold
Only the appropriate source button glows.
4.
On the number keypad, enter the code for your source's brand.
Note: If all six buttons blink three times, you entered an invalid code.
Repeat steps 3 and 4.
5. Press + on the volume button.
6. Test the source for basic functions:
• TV: press the channel buttons. Press
Press and
• Cable/satellite box: press
Press and
• DVD or Blu-ray Disc
Press and
• Game system: press
7.
If your source responds to basic functions, press
your settings.
If your source does not respond
Use the remote control's code scanner to find the code for your source.
1. Press + on the volume button to try another code.
Note: If all six buttons blink three times, you have cycled through all codes for
your source.
2.
Test the source for basic functions (see step 6 in "Program the remote to
control your source").
3.
Repeat steps 1 and 2 until your source responds.
4.
Press
Note: Your source may not be compatible with universal remote controls. Refer to
your source owner's guide for more information.
to navigate.
to navigate.
player: press
™
to navigate.
and
to save your settings.
Using the System
. The settings menu appears.
. The programming guide appears.
. The settings menu appears.
to navigate through your menu.
.
to save
English - 23