AIRLESSCO 007 SPRAY GUN
SPRAY GUN
Attach spray gun to whip hose and tighten fittings
securely. Set the gun safety latch.(Also may be called
gun safety lock) * Refer to Fig. A.
* The gun safety latch should always be set when the
gun is not being triggered.
Read all warnings and safety precautions supplied with
the spray gun and in product manual.
MAJOR COMPONENTS OF SPRAY GUN
AND REVERSIBLE SPRAY TIP
Reversible
Spray Tip
& Guard
Trigger
Guard
SPRAY TIP ASSEMBLY
1. Be sure the pressure relief procedure is followed
before assembling tip and housing to the gun.
2. Insert Rev-Tip cylinder into REV-GUARD (guard
housing assembly).
3. Guide the metal seat into REV-GUARD (guard housing
assembly) through the retaining nut and turn until it seats
against the cylinder.
4. Insert the O ring gasket onto the metal seat so that it
fits into the grooves.
5. Finger tighten the REV-GUARD retaining nut onto the
gun.
6. Turn guard in the desired position.
7. Completely tighten the retaining nut.
REV-GUARD
Guard Housing Assembly
8
Gun Safety
Latch (or Lock)
Handle
(filter inside)
O-Ring Gasket
Retaining Nut
Metal Seat
Rev-Tip
Cylinder
GUN SAFETY
LATCH
IN LOCKED
POSITION
FIG. A
O-RING
GASKET
METAL
SEAT
TO REMOVE CLOGS
FROM SPRAY TIP
1. Turn Rev-Tip handle 180
degrees.
2. Disengage gun safety latch
and trigger gun into pail.
3. Engage gun safety latch
and return handle to
spraying position.
GUN
SAFETY
LATCH
RELEASED
REV-TIP
REV
GUARD
Reverse to
Unplug
Spray Position Shown