Listening To Usb Mass Storage Device/Mp3 Player; Connecting A Usb Device; Playing A Usb Device - Pioneer XC-P01-S Operating Instructions Manual

Listening to USB mass storage device/MP3 player

Listening to USB mass
storage device/MP3
player
You can listen to two-channel audio using the USB interface
on the front of CD player.
Important
• See
About playable music file formats
supported music file formats.

Connecting a USB device

1 Turn on the stereo receiver and CD player.
Refer to To turn the power on on page 13 for details.
2 Press the CD/USB button on the remote control to select
the CD/USB input for the stereo receiver.
You can also select the CD/USB input by pressing the INPUT
button on the remote control repeatedly, or turning the
SOURCE knob on the stereo receiver.
3 Press the CD USB button on the remote control to
select iPod/USB function for the CD player.
You can also select the iPod/USB function by pressing the
CD/USB button on the CD player.
4 Connect a USB device to the CD player via USB
connector.
USB mass
storage device
"Loading" appears on the display panel as the CD player
starts recognizing the connected USB device.
20
En
When the total numbers of folders and tracks are displayed,
the files in the USB device are ready to be played back.
Important
• Pioneer cannot guarantee compatibility (operation and/or
bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may
occur when connected to the CD player.
Note
• This includes playback of WMA/MP3/WAV files (except
files with copy-protection or restricted playback).
on page 28 for
• Compatible USB devices include external magnetic hard
drives, portable flash memory (particularly keydrives) and
digital audio players (MP3 players) of format FAT16/32. It
is not possible to connect the CD player to a personal
computer for USB playback.
• The CD player does not support a USB hub.
• With large amounts of data, it may take longer for the CD
player to read the contents of a USB device.

Playing a USB device

The buttons on the remote control and the CD player can be
used for playback controls of files in a USB device.
Function
Play
Stop/
Pause
Track up/
down
On CD Remote
Operation
player control
Press in the stop/
pause mode.
Press in the playback
mode. Press the  or
 button to resume
playback from the
paused point.
Press in the playback
or stop/pause mode. If
you press the button in
the stop/pause mode,
press the  or 
button to start
playback of the
desired track.
Press and hold in the
Fast
playback mode.
forward/
Release the button to
reverse
resume playback.
− Press to repeat the
REPEAT
REPEAT
playback of files.
− Press to play back files
SHUFFLE
SHUFFLE
in random order.
− Numeric
Press the
Specify
buttons
CD
track
use to specify track
number
number.
*1
See Repeat play on page 16 for details.
*2
See Shuffle play on page 17 for details.
*3
MP3/WMA/WAV files to be played back can be specified from
folders. See About folder playback order on page 18 for details.
Important
• If an error message is displayed, try following the points
below:
Turn on and off the CD player.
-
Reconnect the USB device.
-
Select another input source, then switch back to iPod/
-
USB.
Use a dedicated AC adapter (supplied with the device)
-
for USB power.
If it does not clear the problem, the USB device may not
be compatible with the CD player.
Note
• If the selected file cannot be played back, the CD player
automatically skips to the next playable file.
• Non-roman characters in the playlist are displayed as '*'
in the front panel display.
*1
*2
CONTROL
button first, and
*3