Using The Remote Control - Sony KV-20FS100 Service Manual

Using the Remote Control

1 MUTING
2 SYSTEM OFF
3 TV/VCR
4 PICTURE MODE
5 SLEEP
6 JUMP
7
8 RESET
9 VOL (volume)
0 CODE SET
qa POWER
qs FUNCTION
qd VCR/DVD
(operating)
qf TV/VIDEO
qg DISPLAY
qh MTS/SAP
qj
0 9 and ENTER
qk GUIDE
ql
w;
MENU
wa CH (channel)


If you lose your remote control, see page 36.
Using the Remote Control and Basic Functions
Instantly turns off the sound. Press again or press
sound.
Powers off all Sony equipment at once (may not work with older
equipment).
Press when you are finished using a VCR and you want to switch to
the TV Antenna input. Your VCR power will remain on.
Cycles through the available Video Mode settings.
Turns the TV off automatically in approximately 15, 30, 45, 60 or 90
minutes. Cancel by pressing until SLEEP OFF appears.
Press to jump back and forth between two channels. The TV
alternates between current channel and the last channel that was
selected.
Press for a direct selection of Effect settings (Simulated, WOW, SRS,
Off) (see page 20).
Press to return to factory settings while in an on-screen menu.
Press when you want to adjust the volume.
Use to program your remote control to operate connected video
equipment (see page 32).
Press when you want to turn connected equipment on or off.
Press when you want to control connected equipment with your
remote control.
Operates VCR or DVD. Use when you want to operate connected
VCR or DVD with your remote control.
Cycles through available video inputs.
Press once to show current time (if set) and channel number. Press
again to turn DISPLAY off.
Cycles through the Multi-channel TV Sound (MTS) options: Stereo,
Mono, and Auto SAP (Second Audio Program).
Change the channels directly. Press
channel, then press ENTER.
Brings up the custom guide of your satellite receiver.
Moves the cursor in the on-screen menus. Press the arrow buttons to
move the cursor. Press the center button to select or access an option.
Displays the on-screen menu. Press again to exit the menu at any
time.
Press when you want to change channels.
to restore the
buttons to select a
0 9
13