Using This Manual - HP DesignJet 200 Service Manual

Using this Manual

Purpose
This manual contains information necessary to test, calibrate and service
D HP DesignJet 200 plotters (models C3180A and C3181A)
D HP DesignJet 220 plotters (models C3187A and C3188A)
For information about using these plotters, refer to the corresponding user guides.
Readership
The procedures described in this manual are to be performed by HP qualified service
personnel only.
Training
The HP ongoing training course CEV2 TIJ provides training for HP Customer Engineers, on
servicing the complete HP DesignJet series of large format, thermal inkjet plotters.
Part Numbers
Part numbers for plotter options, accessories and service parts are located in chapter 10.
Conventions
The term
D/A1 size plotters
The term
E/A0 size plotters
A small arrow ' is used to indicate other parts of the Service Manual or User's Guide where
you can find information related to the topic you are consulting.
The w symbol is used to indicate the name of a referenced paragraph.
ii Using this Manual
refers generically to models C3180A and C3187A.
refers generically to models C3181A and C3188A.
C3187 90000