Topfield TRF-2400 User Reference page 96

88 Troubleshooting
Can not get a network connection
• Make sure you are using a Router and not a Modem.
• You can only establish a connection by using the Net-
• Your router settings are not set up correctly in the Top-
• The router is not switched on.
• Check connection of Ethernet cable, making sure they
• Re start Router and try again.
• You are not using a Topfield USB wireless dongle.
Can not connect my external HDD
• Make sure external HDD is formatted in NTFS, then re-
• The HDD must not be more then 1000 GB (1 TB)
• You must make sure that the external HDD is self pow-
Can not get the time to show on the front of the Toppro
The Toppro is designed to save power when in standby mode
as per the Australian MEPS standard. This reduces power con-
sumption to less then 1W when in STAND BY. This can be ad-
justed in the Settings > Miscellaneous > Standby Mode, from
Passive to Active.
I am unable to get out of the MENU
• With all Toppro product you are unable to exit from
• Check the antenna connection.
work cable directly to the Toppro unit.
pro.
are a tight fit in the socket.
formatted to the system when it is connected. This will
ensure that the hard drive is ready to use and the full
capacity is available.
ered
the MENU unless channels have been tuned in to the
recorder.