Writing All Sewing Data To The Cf Card At Once - Brother BAS-311G Instruction Manual

7. USING CF CARDS

7-3-2. Writing all sewing data to the CF card at once

1
2
3
4
End data read/write mode
Refer to the service manual for details on other read/write modes.
48
Writing
TEST indicator switches off
BAS-311G, BAS-326G
Select the [w 2] data read/write mode.
Press the R/W key.
• [SEd-] will change to [ ALL].
* If you press the or
numbers that you would like to write and then continue
to carry out the following procedure, you can write the
selected sewing data in separate lots.
Press the R/W key.
• The buzzer will sound and the all sewing data will be
copied from the internal memory onto the CF card.
• The program numbers that have been written will
appear in the menu display.
* If there is a large volume of data in the internal
memory, it will take some time for all of it to be written.
To halt the writing of data, press the STOP switch. If
you then press the RESET key, the display will change
back to [ ALL].
Press the TEST key.
Turn off the power switch, remove the CF card, and then
close the cover of the CF slot.
4578Q
key to select the program
4577Q
4977Q