Assembling Of The Gear (Stock Rotary Right) - Sony HCD-HPZ7 Service Manual

HCD-HPZ7/HPZ9

3-7. ASSEMBLING OF THE GEAR (STOCK ROTARY RIGHT)

1 Turn over the stocker assy
in the direction of the arrow.
3 Check that these faces are positioned
parallel to each other.
PRECAUTION DURING GEAR
(STOCK PLANET) INSTALLATION
2 Keep the position of the edges of
the stockers and adjust phases.
FRONT
SIDE
44
0 gear (stock rotary right)
UPPER
SIDE
4 gear (stock sun)
6 gear (stock planet)
5 Position to adjust phases
for the gear (stock sun).
7 Position to adjust phases
for the gear (stock planet).
qa washers (5.5)
8 stock base (A)
The cut-off curve should
face to the front.
9 two screws
(BTTP M2.6 × 6)