Locations And Directions - Sanyo PLC-WXU30 Service Manual

Optical Parts Disassembly

, Locations and Directions

When mounting or assembling the optical parts in the opti-
cal unit, the parts must be mounted in the specified loca-
tion and direction as shown in figure below.
1
2
3
Point marker is
printed on this side
up
4
Point marker is
printed on this side
up
5
6
7
8
528
-1-
No. Parts Name
1 Integrator lens (OUT)
 Prism beam splitter (PBS)
3 Condenser lens (OUT)
4 Dichroic mirror (B)
5 Dichroic mirror (G)
6 Condenser lens (G)
7 Relay Lens (IN)
8 Mirror (R)
9 Condenser lens (R)
10 Condenser lens (B)
11 Mirror (B)
Rugged surface
is facing this
side.
Film attached
side is facing this
side.
527
11
10
9
8
Fig.8