Mechanical Disassembly - Sanyo PLC-WXU30 Service Manual

Mechanical Disassembly

Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
z Cabinet Top, Front, R/C Board removal
1. Remove the cabinet top.
. Remove the Cabinet front.
3. Remove the R/C Board.
R/C Board
Cabinet front
(T3x8)x
(M.5x6)x3
(Tx6)X
(M.5x6)
-1-
Screws Expression
(Type ) mm
Diameter x Length
T type M Type
(T3x10)(Black)x5
Cabinet top
Control Buttons
Fig.1