Denon AVR-3310CI Service Manual page 19

2.3. Clearing the protection history
QQ
There are two ways to clear the protection history, as described below. 3 7 63 1515 0
(1) Start up the error (protection history display) mode, display the error, then press and hold in the "ENTER" button for 3
seconds.
P R O T E C T
: T H E R M A L
P R O T E C T
C L E A R
P R O T E C T
: N O P R O T E C T
(2) Initialize.
If you want to save a backup, use the method in 2.3.(1) above.
Warning indication by the STANDBY LED
If the power is turned off when a protection incident has been detected, the STANDBY LED (red) flashes as follows as
warning according to the conditions in which the protection incident occurred.
(1) ASO/DC PROTECTION : Flashes in cycles of 0.5 seconds (0.25 seconds lit, 0.25 seconds off)
(2) THERMAL PROTECTION : Flashes in cycles of 2 seconds (1 second lit, 1 second off)
TE
L 13942296513
3. Mode for switching tuner frequency step ---E2 model only---
3.1. Operation specification
Change tuner frequency step to FM:200kHz/AM:10kHz STEP.
Starting up:
1.With the "STANDARD" and "DIRECT/STEREO" buttons pressed, press the "ON/OFF"
button to turn the power on.
"*Tuner FRQ Set" appears on the display.
* T u
2.Use and select "<AM10/FM200>".
* T u
3.Press the "ENTER" button.
4. Press the "ON/OFF" button to turn the power off.
www
5. Then, press the "ON/OFF" button to turn the power on.
.
NOT : Backup data(Remove settings for Installer Setup) initialization is carried out automatically.
E
http://www.xiaoyu163.com
H I S T O R Y
Press and hold in the "ENTER" button for 3 seconds
H I S T O R Y
The above is displayed and the protection history is cleared.
H I S T O R Y
n e r F R Q
A M 9 / F M 5
n e r F R Q
A M 1 0 / F M 2
x ao
y
i
AVR-3310CI/AVR-3310/AVR990/AVC-3310
http://www.xiaoyu163.com
8
Q Q
3 6 7 1 3
S e t
0
S e t
0 0
u163
.
19
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
f
m
co
9 9
2 8 9 9