Chapter 1 Workflow - Fujitsu ETERNUS DX60 Configuration Manual

Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX"
section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for
each OS.
Required Documents
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel
•
Switch Settings"
"Converged Enhanced Ethernet Administrator's Guide"
•
"Fabric OS Administrator's Guide"
•
• "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris"
"ETERNUS Web GUI User's Guide"
•
Workflow
Setting the FC Port Parameters
Set the to-server connection type.
"2.1.1 Setting the To-server Connection Type (Setting the FC Port Parameters)" (page 8)
•
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.2 Sense Data Conversion (Setting the Host Responses)" (page 9)
•
Setting the FC Host
Register the WWNs of the accessing Fibre Channel cards or Converged Network Adapter cards.
"2.1.3 Registering the WWNs of the Accessing Fibre Channel Cards or Converged Network Adapter
•
Cards (Setting FC Host)" (page 11)
6
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-3182-15ENZ0