Chapter 1 Workflow - Fujitsu ETERNUS DX S4 Series Configuration Manual

Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX/AF"
section of the "Configuration Guide -Server Connection- (Fibre Channel)" for each OS.
Required Documents
"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•
• "Fabric OS Administrator's Guide Supporting Fabric OS"
"Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris"
•
"ETERNUS Web GUI User's Guide"
•
Workflow
Setting the FC Port Parameters
Set the to-server connection type.
• "2.1.1 Setting the To-Server Connection Type (Setting the FC Port Parameters)" (page 8)
Setting the LUN Groups
Set the server accessible LUN groups.
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 9)
•
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.3 Setting the Host Responses" (page 10)
•
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2017 FUJITSU LIMITED
6
P3AM-7962-15ENZ0