Features Menu - Philips 24PFL2159/V7 User Manual

4.10 Features Menu

1 Press
2 Select [Setup] > [Features]
then press OK
3 Select one of the following settings.
then press OK. .
Press to move, and press
Back Light
Picture
Energy Saving
Sound
EasyLink
Software Update
Installation
Reset
Features
Parental
• [Back Light] :
The backlight value
can be varied . This function used to
adjust brightness level of panel.
• [Energy Saving]:
To save
the power consumed by TV, select
power saving modes Off/low/Mid/ High/
Audio only Mode.
After selection of Low/Mid/high energy
saving indication displayed on energy
meter by pressing info key of remote control
Low: After selection of energy saving
option to "Low", approx.5% of rated
power will get saved.
Mid: After selection of energy saving
option to "Mid", approx.10% of rated
power will get saved.
High: After selection of energy saving
option to "High", approx 25% of rated
power will get saved.
Audio only : After selection of energy
saving to "Audio only " panel power
switched off & only audio come
from TV sets which results in
power saved of approx 35%
Note:Press any key ( except Find,Text,
subtitle Vol +/- and Mute)
to exit 'Audio only' mode
• [Easy Link]: If you connect HDMI-CEC
compliant devices through HDMI,you
can control them at the same time with
your TV remote control.
14 EN
[Software Update] :
•
This option is for updating the software.
• [Reset] : Reset to factory default settings.
4.11 Parental Menu
to adjust.
Picture
Sound
Installation
Features
Parental
1 Press
2 Select [Setup] > [Parental]
then press OK
3 Select one of the following settings.
then press OK.
• [Child Lock]: Enter the password, then
the following menus will open.
Note: Default password is "0000"
•
[Child Lock Switch]:Make the child lock
switch ON to lock the source/channel.
•
[Change Password]: Select this option
to change the password.
•
[Channel Block]: Select the channels to
to be locked and press '2' to lock or .
unlock the channels.
•
[Video Lock]: Select the sources
with up/down keys on remote and press
OK to set or clear lock.
• [Clear All]: Reset the child lock
option to default value.
Child Lock
. .
. .