Front Panel; Rear Panel - Pioneer BDP-150 Operating Instructions Manual

01
Note
• To operate an AV receiver equipped with a remote
control mode setting using the RECEIVER CONTROL
buttons, set the AV receiver's remote control mode to
"1". For details, see the AV receiver's operating
instructions.

Front Panel

1
 STANDBY/ON – Press to turn the power on and
1
off.
2 Disc tray
3 Front panel display
4 Reset button – If the power cannot be turned off (set
to standby), use a thin rod to press this button. The
unit restarts, at which point it is again operable.

Rear Panel

1 2
1 DIGITAL OUT (COAXIAL) terminal – (page 16)
2 VIDEO OUT terminal – (page 16)
3 AUDIO OUT terminals – (page 16)
4 HDMI OUT terminal – (page 13)
12
En
2
3 4 5 6
3 4 5 6
5 Remote control sensor – Point the remote control to
this, then operate it within approximately 7 m.
The player may have trouble capturing remote control
signals if there is a fluorescent light nearby. If this
happens, move the player away from the fluorescent
light.
 OPEN/CLOSE – Press to open and close the disc
6
tray.
 – Press to stop playback.
7
8 USB port – (page 16)
9  – Press to start playback.
5 LAN (10/100) terminal – (page 17)
6 USB port – (page 16)
7 AC IN – (page 18)
7 8 9
7