Radio - Kenwood KMM-BT312U Instruction Manual

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM / UPDATE BT
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
REM SETTING* (for )
REMOTE ID SET Remote control ID list is displayed.
YES: Indicates that this ID is already registered. ; NO: Indicates that this
ID is available.
Turn the volume knob to select an available ID (REM ID1/ ID2/ ID3),
then press the knob to register.
REMOTE ID DEL REM ID1 DELETE/ ID2 DELETE/ ID3 DELETE: Selects the registered
remote control ID to delete.
YES: Deletes the selected remote control ID. ; NO: Cancels.
CLOCK
CLOCK DISPLAY (For
ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
2
DATE SET*
(For
DD/MM/YY: Sets the date for marine remote control display.
* Displayed only when KCA-RC55MR (optional accessory) is connected. ( 29)
)
)

RADIO

Search for a station
1 Press repeatedly to select TUNER.
2 Press repeatedly (or press
select FM1/ FM2/ FM3/ AM.
Press S / T (or press S /
3
station.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406) (
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
/ on RC-406) to
on RC-406) to search for a
)
for
2
, Direct Access Tuning
5
ENGLISH