Table of Contents
Advertisement
Message
Warning! Do not turn off your
camera during update!
Connection Failed!
Please update firmware after
full charged!
Write Protect !
Card Full !
Description
The message appears during the
firmware update process.
Failure to connect to your PC, printer,
TV .
The firmware cannot be updated when
power is insufficient.
The SD card is locked.
Indicates that the SD card is full.
Action
The message disappears after the
camera update and restart.
Remove USB cable and retry
connection
A message appears to prompt updating
after full charging and returning to the
update screen.
Remove SD card and switch the
lever on the side of card to UNLOCK.
The message will disappear after 2
seconds.
Replace SD card with another that has
available memory. The message will
disappear after 2 seconds.
83
Advertisement
Table of Contents
