Video System - Kodak PIXPRO FZ52 User Manual

3. Connect the other end of the cable to an available
USB port on your computer.
4. After the transmission is complete, disconnect the
USB cable according to the instructions specifying
how to safely remove USB devices.
70

Video System

You can use the AV cable (which should be pur-
chased separately) to connect the camera and the
television for realizing the video output. Connect one
end of the AV cable to AV port of the camera, connect
the other end to AV-OUT port of the television. Adjust
the format of the video output system according to
your requirements, and the steps are as follows:
1. Press the button, press the up/down arrow
button to select and press the
enter the menu.
2. Press up/down arrow button to select
press the button or right arrow button to enter
the menu.
3. Press the up/down arrow button to
select「TV-System」and press the
right arrow button to enter the menu.
4. Press the up/down arrow buttons to select
「NTSC」or「PAL」and press the
confirm.
button to
and
button or
button to