Release Shutter Without Card - Canon EOS 7D Mark II Instruction Manual

Hide thumbs Also See for EOS 7D Mark II:
Table of Contents

Advertisement

Installing and Removing the Card
3
Card
Possible
selection icon
shots
CF card indicator
SD card indicator
The camera cannot use Type II CF cards or hard disk-type cards.
Ultra DMA (UDMA) CF cards can also be used with the camera. UDMA
cards enable faster data writing.
SD/SDHC/SDXC memory cards are supported. UHS-I SDHC or SDXC
memory cards can also be used.
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Even if shooting 2,000 or more shots is possible, the indicator will display
only up to 1999.
Setting [z1: Release shutter without card] to [Disable] will prevent
you from forgetting to insert a card (p.484).
42
Close the cover.
Close the cover and slide it in the
direction shown by the arrows until it
snaps shut.
When you set the power switch to
<1> (p.45), the number of possible
shots and the loaded card(s) will be
displayed on the LCD panel.
The images will be recorded to the
card indicated by the arrow < >
icon.

Advertisement

Table of Contents
loading

Table of Contents