Acquiring Gps Signals - Canon EOS 7D Mark II Instruction Manual

Acquiring GPS Signals

To acquire GPS signals, take the camera outside where the sky is
unobstructed. Face the top of the camera toward the sky while keeping
your hands, etc., away from the camera top.
When the signal acquisition conditions are good, it will take the camera
approx. 30 sec. to 60 sec. to catch the GPS satellite signals after you
set [GPS] to [Enable]. Check that [r] is displayed on the LCD panel,
then shoot.
1
2
GPS Acquisition Status
Select [GPS/digital compass
settings].
Under the [52] tab, select [GPS/
digital compass settings], then
press <0>.
Set [GPS] to [Enable].
GPS acquisition status is indicated by
the [r] icon on the LCD panel and on
the shooting function settings screen.
Constant r: Signal acquired
Blinking r: Signal not acquired yet
When you shoot while [r] is
displayed, the image will be geotagged.
201