Kenwood TK-2180 Service Manual page 34

TK-2180
Item Condition
11. VOX1 1) Adj item : [VOX1]
adjust Adjust : [✳✳✳]
AG : 1kHz/45mV at MIC terminal
12. VOX10 1) Adj item : [VOX10]
adjust Adjust : [✳✳✳]
AG : 1kHz/3mV at MIC terminal
13. QT deviation 1) Remove the panel tuning
adjust cable assembly from the
universal connector.
Adj item : [n QT]
Adjust : [✳✳✳]
Deviation meter filter
LPF : 3kHz
HPF : OFF
2) Adj item : [nL QT] →
• Narrow
[nC QT] → [nH QT]
Adjust : [✳✳✳]
PTT : ON
• Wide 4k 3) Adj item : [s QT]
Adjust : [✳✳✳]
PTT : ON
• Wide 5k 4) Adj item : [w QT]
Adjust : [✳✳✳]
PTT : ON
14. DQT 1) Adj item : [n DQT]
deviation Adjust : [✳✳✳]
adjust Deviation meter filter
LPF : 3kHz
HPF : OFF
2) Adj item : [nL DQT] →
• Narrow
[nC DQT] → [nH DQT]
Adjust : [✳✳✳]
PTT : ON
• Wide 4k 3) Adj item : [s DQT]
Adjust : [✳✳✳]
PTT : ON
• Wide 5k 4) Adj item : [w DQT]
Adjust : [✳✳✳]
PTT : ON
15. LTR 1) Adj item : [n LTR]
deviation Skip it
adjust
2) Adj item : [nL LTR] →
• Narrow
[nC LTR] → [nH LTR]
Skip it
• Wide 3) Adj item : [w LTR]
Skip it
34
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
AG Panel Universal Panel
connector
Power meter Panel ANT Panel
Deviation Universal
meter connector
Oscilloscope
AG
AF VTVM
Adjustment
Parts Method
After apply signal
from AG, press [B]
key that numeric
will be stored in
memory.
± 50Hz
Selector 0.35kHz
knob
± 50Hz
0.60kHz
± 50Hz
0.75kHz
± 50Hz
0.35kHz
± 50Hz
0.60kHz
± 50Hz
0.75kHz
Specifications/Remarks