Deactivating The Memory Feature; Replacing The Battery - Lincoln MKT Owner's Manual

Locks and Security
2. Press and hold either the 1 or 2
control on the driver's door for five
seconds. (A tone will be heard after
1 1 ⁄ seconds when the memory store
2
is done) continue to hold until a
second tone is heard after five
seconds.
3. Within three seconds press
the control on the transmitter.
4. A tone will be heard when the
activation is complete.
5. Repeat this procedure for another transmitter if desired.

Deactivating the memory feature

To deactivate this feature:
1. Press and hold either the 1 or 2 control on the driver's door for five
seconds. (A tone will be heard after 1
is done) continue to hold until a second tone is heard after five seconds.
2. Within three seconds press the
3. A tone will be heard when the deactivation is complete.
4. Repeat this procedure for another transmitter if desired.

Replacing the battery

The Intelligent Access key (IA key) uses one coin type three-volt lithium
battery CR2032 or equivalent.
To replace the battery:
1. Remove the backup key from the
transmitter, then twist a thin coin in
the slot hidden behind the backup
key slot to remove the battery
cover.
Note: Do not wipe off any grease on
the battery terminals or on the back
surface of the circuit board.
160
2010 MKT (mkt)
Owners Guide, 1st Printing
USA (fus)
1 ⁄ seconds when the memory store
2
control on the transmitter.