Using The Right Bulbs; Examples Of Acceptable Condensation - Lincoln MKT Owner's Manual

Lights
Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of
the lens
Take your vehicle to dealer for service if any of the above conditions of
unacceptable moisture are present.

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized "D.O.T." for North America and an "E" for
Europe to ensure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.
Function
*Front turn lamp
*Front sidemarker lamp
*Front park lamp
*Headlamp
*Tail/brake/turn signal lamp
*Rear sidemarker
*Backup lamp
License plate lamp
*High-mount brake lamp
Fog lamp (if equipped)
*First row dome/map lamp
*Second row dome/map lamps
*Third row cargo lamp
Visor vanity lamp
To replace all instrument panel lights - see your authorized dealer.
*To replace these lamps - see your authorized dealer.
106
2010 MKT (mkt)
Owners Guide, 1st Printing
USA (fus)
Number of bulbs
2 PY24W SV+
N/A
N/A
2
N/A
N/A
N/A
2
N/A
2
2
2
1
2
Trade
number
LED
LED
D3S HID
LED
LED
LED
C5WL
LED
H11
W5W
W5W
211-2XB
37