Acura TSX 2007 Owner's Manual page 179

On vehicles with navigation system
To use the SCAN, preset and A.SEL
function, press the AUDIO DISPLAY
button to view these icons.
SCAN The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button, or
touch the SCAN icon (models with
navigation system), then release it.
You will see SCAN in the display.
The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 5 seconds.
If you do nothing, the system will
then scan for the next strong station
and play it for 5 seconds. When it
plays a station you want to listen to,
press the SCAN button or touch the
SCAN icon again.
Each preset button or icon
Preset
can store one frequency on AM, and
two frequencies on FM.
1. Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button or icon.
2. Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Playing the AM/FM Radio
3. Pick the preset number (1
you want for that station. Press
the button or icon and hold it until
you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The preset frequencies may be lost if
your vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.
CONTINUED
6)
173