Setting The Image Stabilizer Function - Canon PowerShot TX1 User Manual

-When the Aspect Ratio is [16:9]
Recording Pixels Purpose*
~
(Widescreen)
Printing on wide size paper (Image at a
3072 1728 horizontal to vertical ratio of 16:9 will be
. x I recorded. Areas that will not be recorded
plxe s appear on the LCD monitor as a black
border.)
*
Paper sizes vary according to region.
Approximate Values for Compression Settings
Compression
Purpose
rn
Superfine
High Quality Shoot higher quality images
!:l
Fine
t
Shoot normal quality images
!:J
Normal Normal Shoot more images
t=StljmarE~a c.;.apaclt/E~S (p. 142).
Setting the Image Stabilizer
Function
[!]
~
m
The lens shift type image stabilizer function allows you to minimize
the camera shake effect (blurred images) when you shoot distant
subjects that have been magnified or when you shoot in dark
conditions without a flash.
You can check the effect of the IS mode on image
fj]
Continuous
blur on the LCD monitor since the IS mode runs
continually. This makes it easier to compose
images and focus on subjects.
IS mode is only activated when the shutter button is
pressed. When set to [Continuous], some blurring may
0
Shoot Only
occur depending on the subjects. In Shoot Only mode,
subjects can be taken without concern for any unnatural
movement that may appear on the LCD monitor.
This option only stabilizes the effect of up and down
D
Panning
camera motions on the image. This option is
recommended for shooting objects moving horizontally.
II
en
::s-
o
o
....
:i"
CQ
31