Setting The Image Stabilizer Function - Canon Power Shot A 720 IS User Manual

681
Commonly Used Shooting Functions
I
Setting the Image Stabilizer Function
~
~ See
Functions Available in Each Shooting Mode (p. 206).
ShOQtingMode
tmID
~ ~ ~ i~
If. SeN c:Q -1JItI* P Tv Av M
* Only [Continuous] can be set.
The lens shift type image stabilizer function allows you to minimize the
camera shake effect (blurred images) when you shoot distant subjects
that have been magnified or when you shoot in dark conditions without
a flash.
You can check the effect of the IS mode on image blur on
f] Continuous
the LCD monitor since the IS mode runs continually. This
makes it easier to compose images and focus on
subjects.
IS mode is only activated when the shutter button is
0
Shoot Only
pressed, so subjects will be captured with reduced blur
even if their movements on the LCD monitor are not
smooth.
This option only stabilizes the effect of up and down
a
Panning camera motions on the image. This option is
recommended for shooting objects moving horizontally.
1
Select [IS Mode].
1. Press the
0
button.
MENU
2. In the [L!'J] menu, use the ... or ..
button to select [I S Mode].
2
Accept the setting.
1. Use the .. or .. button to select
[Continuous], [Shoot Only],
[Panning] or [Off].
2. Press the
0
button.
MENU