Connections (E, Mx, Ch, Ea Model); Location Of Controls And Basic Operations (E, Mx, Ch, Ea Model) - Sony CDX-S22 Service Manual

Location of controls and basic operations
(E, MX, CH, EA model)
Location of controls and basic operations
Main unit
1 2 3 4
SEL
SOURCE MODE
– GROUP +
DIM
DSPL SENS 1 2
qa qs qd qf qg
Refer to the pages listed for details.
A Volume +/– button
To adjust volume.
B SEL (select) button 4, 7
To select items.
C SOURCE button
To power on; change the source (Radio/CD).
D MODE button 6
To select the radio band (FM/AM).
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
H EQ3 (equalizer) button 7
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
I Z (eject) button
To eject the disc.
J SEEK +/– button
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
K
(front panel release) button 4

Connections (E, MX, CH, EA model)

A
B
AUDIO OUT REAR
* AUDIO OUT SUB/REAR
5 6 7 8 9 0
ATT EQ3 SEEK
REP SHUF PAUSE
3 4 5 6 BTM OFF
CDX-S22S
qh qj qk CDX-S22 ql
L DSPL (display)/DIM (dimmer) button
4, 6
To change display items (press); change the
display brightness (press and hold).
M SENS button
To improve weak reception: LOCAL/
MONO.
N RESET button (located behind the front
panel) 4
O Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
P Number buttons
CD:
(1)/(2): GROUP* –/+
To skip groups (press); skip groups
continuously (press and hold).
(3): REP 6
(4): SHUF 6
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Q BTM button 6
To start the BTM function (press and hold).
R OFF button
To power off; stop the source.
S Receptor for the card remote
commander 8
* When an MP3/ATRAC CD is played.
*
5
Connection example
Notes (2- B )
• Be sure to connect the earth lead before connecting the
amplifi er.
• The alarm will only sound if the built-in amplifi er is used.
Ejemplo de conexiones
Notas (2- B )
• Asegúrese de conectar primero el cable de conexión a masa
antes de realizar la conexión al amplifi cador.
• Los pitidos se activarán únicamente si se utiliza el amplifi cador
integrado.
CDX-S22/S22S
7