Sony CDX-S22 Quick Manual

Location of controls and basic operations
1 2 3 4 5 6
SEL
SOURCE MODE
+
DIM BTM – GROUP REP SHUF PAUSE
DSPL SENS 1 2 3 4 5 6
qa qs qd qf qg
J SEEK +/– button
A Volume +/– button
To adjust volume. CD:
B SEL (select) button
To skip tracks (press); skip tracks continuously
(press, then press again within about 1 second
To select items.
C SOURCE button and hold); fast-forward/reverse a track (press
and hold).
To power on; change the source (Radio/CD).
D MODE button Radio:
To tune in stations automatically (press); find a
To select the radio band (FM/MW/LW).
station manually (press and hold).
E Disc slot
K
(front panel release) button
Insert the disc (label side up). Playback starts
L DSPL (display)/DIM (dimmer) button
automatically.
To change display items (press); change the
You can play CD-DA (also containing CD
display brightness (press and hold).
TEXT), CD-R/CD-RW (MP3 files also
M SENS/BTM button
containing Multi Session) and ATRAC CD
To improve weak reception: LOCAL/MONO
(ATRAC3 and ATRAC3plus format).
F Display window
(press); start the BTM function (press and
G ATT (attenuate) button hold).
For details on the BTM function, see "Storing
To attenuate the sound. To cancel, press again.
stations automatically" on this sheet.
H EQ3 (equalizer) button
N RESET button (located behind the front
To select an equalizer type (XPLOD, VOCAL,
panel)
CLUB, JAZZ, NEW AGE, ROCK, CUSTOM
Detach the front panel and press the RESET
or OFF).
button with a pointed object, such as a ballpoint
To adjust the equalizer curve, see "Customizing
pen.
the equalizer curve" on the reverse side of this
sheet.
Notes
I Z (eject) button
• Before operating the unit for the first time, or after
replacing the car battery or changing the
To eject the disc.
connections, you must reset the unit.
• Pressing the RESET button will erase the clock
setting and some stored contents.
© 2006 Sony Corporation
CDX-S22
O Number buttons
7 8 9 0
CD:
(1)/(2): GROUP* –/+
To skip groups (press); skip groups
continuously (press and hold).
(3): REP
(4): SHUF
(6): PAUSE
ATT EQ3 SEEK
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations
PTY AF/TA OFF
(press and hold).
P PTY (Programme Type) button
CDX-S22
To select PTY in RDS. After pressing (PTY),
qh qj qk ql
press (SEEK) +/– to search for a station.
Q AF/TA button
AF (Alternative Frequencies)/TA (Traffic
Announcement), TP (Traffic Programme):
Each time you press (AF/TA), the item changes
as follows:
AF-ON t TA-ON t AF, TA-ON t
AF, TA-OFF
R OFF button
To power off; stop the source.
S Receptor for the card remote
commander
* When an MP3/ATRAC CD is played.
Warning if your car's ignition has no
ACC position
After turning the ignition off, be sure to press
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and
this causes battery drain.
SET UP
Detaching the front panel Setting the clock
The clock uses a 24-hour digital indication.
You can detach the front panel of this unit to prevent
theft.
1
Press and hold (SEL).
1 The setup display appears.
Press (OFF).
The unit is turned off.
2
Press (SEL) repeatedly until "CLOCK-
2 ADJ" appears.
Press , then pull it off towards you.
3
Press (DSPL).
The hour indication flashes.
4
Press the volume +/– button to set the
hour and minute.
(OFF)
To move the digital indication, press (DSPL).
5
Press (SEL).
The setup is complete and the clock starts.
Tip
You can set the clock automatically with the RDS feature.
Attaching the front panel For details, see "Adjusting setup items" on the reverse
side of this sheet, and set to "CT-ON" (Clock Time).
Engage part A of the front panel with part B of the
unit, as illustrated, and push the left side into
position until it clicks.
A
B
Display items/Repeat and shuffle play/
Adjusting the sound characteristics/
B
Customizing the equalizer curve/
Adjusting setup items
RADIO
Storing stations automatically
— BTM
The unit selects strong signal stations and stores
them. You can store up to 6 stations per band (FM1,
FM2, FM3, MW, or LW).
Caution
When tuning in stations while driving, use BTM
(Best Tuning Memory) to prevent accidents.
1
Press (SOURCE) repeatedly until
"TUNER" appears.
To change the band, press (MODE) repeatedly.
You can select from FM1, FM2, FM3, MW or
LW.
2
Press and hold (BTM) until "BTM"
flashes.
The unit stores stations in order of frequency on
the number buttons.
A beep sounds when the setting is stored.