Table of Contents
Advertisement
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
9
44
www.mymowerparts.com
Separate the shaft tubes so that you can pull one hose
at a time through the first tube. Start with the return
hose.
Remove the shaft clips, if fitted.
Pull the hoses through the second tube and third tube, if
fitted. Replace the protective guards if necessary.
Assembly
Slide the protective guards onto the hose. Feed the hose
through the larger shaft(s) and fit the shaft clips.
Feed both hoses through the smaller shaft, positioning
the pressure hose slightly in front of the pressure hose.
Fit the ball joint. The locating stud on the jubilee clip fits
in the hole in the ball joint.
Hide quick links:
Advertisement
Table of Contents
