Sony Bravia XBR-65X950B Operating Instructions Manual page 21

;-~~C)mmended
Measures
to
Secure the TV
Consider the following measures when
securing your TV to a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately
support the weight of the TV. Use two
angle braces (not supplied) to secure
the stand. For each angle brace use the
appropriate hardware to:
• Attach one side of the angle brace to
the wall stud.
• Attach the other side to the Stand.
~Angle
brace
~
/I
(not supplied)
• Stand
2
Secure the TV to the Stand.
Use the optional hardware listed as
follows (not supplied):
• M4 machine screw (screwed into the
TV's rear cover)
• A screw or similar (attach it to the
Stand)
• Rope or chain (strong enough to
support the weight of the TV). Make
sure that there is no excess slack in
the rope or chain.
XBR-65X950B
XBR-65/55X900B
Screw hole on
the rear cover
+ ,
CD
~~chine
~
.............. screw(not
h~
supplied)
Screw
(not supplied)
Screw hole on
the rear cover
+ . .
CD
~:ch1ne
~
.............. screw (not
h~
supplied)
Screw
(not supplied)
The length of the M4 machine screw
differs depending on the rope or chain
diameter. Please see below illustration.
8-12 mm
Screw M4
.,__ __ Rope or chain
TV's rear cover
21
us