For more information about how to use the diagnostic USB connector on your computer, decipher the error
codes, or use the Lenovo Mobile Diagnostic application, go to http://www.lenovo.com/support.
The hardware diagnostic function is enabled on your computer by default. To disable the function, do
the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 37.
2. From the Setup Utility program main menu, select Advanced ➙ Diagnostic function, and then press
Enter.
3. Select Real-time Diagnostic Monitoring and press Enter. Then select Disabled and press Enter.
4. Press F10 to save changes and exit the Setup Utility program.
.
Chapter 7
Troubleshooting and diagnostics
67