Table of Contents
Advertisement
"Error No.: 300"
"Error No.: 1281"
"Error No.: 1283"
"Error No.: 1284"
"Error No.: 1320"
"Error No.: 1321"
"Error No.: 1700"
"Error No.: 1851"
"Error No.: 1856"
Printer you want to
use is not selected
on the Printer pop-
up menu on the
Print dialog box
The Front Tray is up
when printing from
the Auto Sheet
Feeder starts
The Front Tray ·is
pulled up while
printing from the
Auto Sheet Feeder
The Front Tray is
pulled down while
printing from the
Front Tray
The printer is not
ready to feed paper
from the Front Tray
yet
The paper is not
loaded correctly in
the Front Tray
The ink absorber is
nearly full
Inner Cover is open
when. printing
starts
Inner Cover is
opened while
printing
Troubleshooting
Select Pr09000 on the Printer pop-up menu on the Print dialog box.
If Pr09000 does not appear on the Printer pop-up menu, do the following to
confirm the printer settings:
1. Select Print and Fax Preferences from the Printer pop-up menu.
When using Mac OS X v.10.3.x or Mac OS X v.10.2.8, select Edit Printer List
from the Printer pop-up menu.
2. Ensure that Pr09000 is displayed and the check box is selected in the screen
that is displayed.
When using Mac OS X v.10.2.8, ensure that Pr09000 is displayed in the
Printer List.
3. If Pr09000 is not displayed in the screen displayed in step 2, click Add(+) to
add the printer.
If you cannot add the printer, follow the procedures described in the
Easy
Setup Instructions and reinstall the driver.
Return the Front Tray to its normal printing position. Ensure that paper is loaded
in the Auto Sheet Feeder and then press the RESUME/CANCEL button on the
printer to resume printing.
Refer to "Returning the Front Tray to Its Normal Printing Position" on page 14 for
details about how to return the Front Tray to its normal printing position.
Return the Front Tray to its normal printing position, then press RESUME/
CANCEL button on the printer and try printing again.
Refer to "Returning the Front Tray to Its Normal Printing Position" on page 14 for
details about how to return the Front Tray to its normal printing position.
Do not move the Front Tray during printing.
Return the Front Tray to the Front Paper Feeding Position, then press the
RESUME/CANCEL button on the printer and try printing again.
Refer to "Loading Paper in the Front Tray" on page 10 for details about how to
return the Front Tray to the Front Paper Feeding Position.
Do not move the Front Tray during printing.
Load the paper correctly in the Front Tray according to the procedure described
in "Loading Paper in the Front Tray" on page 10 and press the RESUME/CANCEL
button on the printer.
Press the RESUME/CANCEL button on the printer to clear the error, and then
load the paper correctly in the Front Tray according to the procedure described
in "Loading Paper in the Front Tray" on page 10 and try printing again.
The printer has a built-in ink absorber to hold the ink used during print head
cleaning, for example. This error message indicates that this ink absorber is
nearly full.
Press the RESUME/CANCEL button to clear the error so you can continue
printing. Before the ink absorber becomes completely full, contact the Customer
Care Center.
When you experience this error, you will need to call for servicing to replace the
ink absorber and to check the printer for proper operation.
Close the Inner Cover, then press the RESUME/CANCEL button to resume
printing.
Close the Inner Cover, then press the RESUME/CANCEL button ..
One page of the print data being sent at the time of the error will be erased, so
print that page again.
79
Advertisement
Table of Contents
Troubleshooting
