Download Print this page

Genie TPIR-607 Series Instruction Manual

Infrared illuminator enclosure

Advertisement

Quick Links

INSTRUCTION MANUAL
TPIR-607 Series
INFRARED ILLUMINATOR ENCLOSURE
IP66 RoHS

Advertisement

loading

Summary of Contents for Genie TPIR-607 Series

  • Page 1 INSTRUCTION MANUAL TPIR-607 Series INFRARED ILLUMINATOR ENCLOSURE IP66 RoHS...
  • Page 2 SAFETY WARNING / HOUSING SPECIFICATIONS CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL. UNPACKING: Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears to have been damaged in shipment, pack it correctly in its carton and notify the shipper.
  • Page 3: Part Description

    PART DESCRIPTION Universal IR Control Circuit Board 1. Lens Cap with Heater 2. Temper Glass 3. IR LED 4. IR Board and IR Board Bracket 5. Universal IR Control Circuit Board: To control color/mono switching and IR on/off synchronization. 6. Camera Bracket 7.
  • Page 4 PART DESCRIPTION / POWER CONNECTION 8. Blower and Blower Bracket 9. Thermostat Switch : Turn on at 28゚C and turn off at 18゚C 10. Video Input BNC Male Connector : Connect to camera. 11. Video Out BNC Female Connector : Connect to monitor. 12.
  • Page 5 INSTALLATION Side View Zoom Ring Focus Ring 1. Loosen two screws on both sides of the camera bracket first. 2. Use provided screw to fix the camera on the camera bracket. 3. Adjust zoom, focus and iris of the lens on the camera.
  • Page 6: Installation

    INSTALLATION Video Out BNC Female Connector Adjust position and direction To external power source Dimensions of Bracket Base 110.00mm 83.00mm 8.00mm...
  • Page 7 GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 1LT Tel+44(0)1707 330541 Fax+44(0)1707 330543 www.geniecctv.com...