Pip; Pbp - LG 42WS50MS Owner's Manual

52
CUSTOMIZING SETTINGS
PIP/PBP
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens. (See p.40)
Mode
*PIP(Picture In Picture): Displays the Sub screen
in the main screen.
*PBP(Picture By Picture): Displays the Sub
screen next to the main screen.
Sub
Main
screen
screen

PIP

Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
bottom left
Size
Adjusts the size of the subscreen (Size 0-10).
10 : 960x540
PIP
0 :
480x270
< 1920x1080 >

PBP

top right
bottom right
PBP
960x1080
NOTE
y
The subscreen is only supported when using the
USB device.
Component
RGB
Main
HDMI/DVI-D/Display Port
AV
y
You can only change the size and position in PIP
mode.
y
With PBP selected, the Aspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
y
While running the PBP function, the Tile Mode function
does not work.
y
You must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
y
If you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
y
You cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
y
The picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
y
Even when the power is turned off or on, if the
USB device is connected, the PIP/PBP mode plays
again from where it left off.
y
If you play videos you selected in PIP/PBP mode,
the videos will play back repeately in succession.
y
The buttons below work in PIP mode.
Button Photo
Sub
USB
O
O
O
X
Movie