Virtualization Technology - Toshiba TECRA S5 User Manual

Ending the BIOS Setup Program Halfway
The configuration settings can be terminated halfway without saving any of
the changes made by following the steps detailed below:
1. Press the ESC key - the Exit without saving? (Y/N) prompt to
2. Press the Y key - the BIOS setup application will exit and the computer
Supervisor Password
This setting, which is displayed on the first page of the setup screen, allows
you to register a Supervisor Password of the computer.
Not Registered
Registered
The User Password and Supervisor Password configured in BIOS SETUP
can also be changed or deleted using the TOSHIBA Password Utility.
When unable to perform the following operations, use the TOSHIBA
Password Utility to change or delete the configured Supervisor Password.
• Configuration changes in the BIOS Setup Program
• Configuration changes in the HW Setup utility
• Selection of the startup device during computer recovery.
Core Multi - Processing
The Core Multi-Processing sets the CPU operating mode.
Enabled is Dual Core mode.
Disabled is Single Core mode.
Please note that this option is displayed only on models with an Intel
Core™ 2 Duo processor.
Enabled
Disabled

Virtualization Technology

Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.
Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.
The Virtualization Technology is supported with some models.
Downloaded from LpManual.com Manuals
User's Manual
be displayed at the bottom of the screen.
will automatically restart.
Supervisor Password has not been registered
(Default).
Supervisor Password has been registered.
Enables Core Multi - Processing functions
(Default).
Disables Core Multi - Processing functions.
HW Setup & BIOS Setup
®
7-9