Table of Contents
Advertisement
Ending the BIOS Setup Program
Save the changes and end the program.
1. Press the End Key.
The "Are you sure? (Y/N) The changes you made will
cause the system to reboot." message is displayed.
2. Press the Y key.
The configured settings are saved and the BIOS setup program ends.
The computer may reboot depending on the settings that were
modified.
Ending the BIOS Setup Program Halfway
The configuration settings can be terminated halfway without saving any of
the changes made.
1. Press the Esc key.
The "Exit without saving? (Y/N)" message is displayed.
2. Press the Y key.
The BIOS setup program will end.
Core Multi - Processing
The Core Multi-Processing sets the CPU operating mode.
This option is displayed only on models with an Intel
Enabled is Dual Core mode.
Disabled is Single Core mode.
Enabled
Disabled
Virtualization Technology
Virtualization Technology sets enable or disable of the Intel Virtualization
Technology installed in the CPU.
Intel Virtualization Technology is the technique that allows one machine to
operate as multiple virtual machines.
The Virtualization Technology is supported with some models.
The Disabled command does not allow use of the Intel Virtualization
Technology.
The Enabled command allows use of the Intel Virtualization Technology.
Enabled
Disabled
User's Manual
Enables Core Multi - Processing functions
(Default).
Disables Core Multi - Processing functions.
Enables Virtualization Technology.
Disables Virtualization Technology (Default).
HW Setup
®
Core™ Duo processor.
7-9
Advertisement
Table of Contents
